2024-10-23T18:09:17Z

45.27.172.161:

<hr>This page includes both cmd and powershell commands, realistically, all of them should run from powershell anyway.<hr>

<hr>ipconfig<hr>

The ipconfig command is a command-line utility used to display and manage the IP address assigned to a machine. It provides information about the current TCP/IP network configuration, including the IP address, subnet mask, and default gateway for all adapters . In Windows, typing ipconfig without any parameters displays the computer's currently assigned IP, subnet mask, and default gateway addresses. Additional parameters can be used to perform various actions, such as releasing and renewing IP addresses, flushing the DNS cache, and displaying DNS information.

<code>ipconfig</code>

Displays the basic TCP/IP configuration for all adapters.

<code>ipconfig /all</code>

Displays the full TCP/IP configuration for all adapters.

<code>ipconfig /release</code>

Releases the IP address assigned to the computer.

<code>ipconfig /renew</code>

Renews the IP address assigned to the computer.

<code>ipconfig /flushdns</code>

Purges the DNS resolver cache.

<code>ipconfig /registerdns</code>

Refreshes all DHCP leases and re-registers DNS names.

<code>ipconfig /displaydns</code>

Displays the contents of the DNS cache.

<code>ipconfig /showclassid</code>

Displays the DHCP class ID for network adapters.

<code>ipconfig /setclassid</code>

Sets the DHCP class ID for network adapters.

<code>ipconfig /allcompartments</code>

Displays the full TCP/IP configuration for all adapters, including all compartments.

<code>ipconfig /release6</code>

Releases the IPv6 address assigned to the computer.

<code>ipconfig /renew6</code>

Renews the IPv6 address assigned to the computer.

<code>ipconfig /showclassid6</code>

Displays the IPv6 DHCP class ID for network adapters.

<code>ipconfig /setclassid6</code>

Sets the IPv6 DHCP class ID for network adapters.

<code>ipconfig /flushdns6</code>

Purges the IPv6 DNS resolver cache.

<hr>

USE THIS IF WINDOWS IS ACTING UP HELLA WEIRD

The <code>DISM /Online /Cleanup-Image /RestoreHealth</code> command is used to scan for corruption in the Windows image and repair any issues found. DISM stands for Deployment Image Servicing and Management, and it is a command-line tool used to service and prepare Windows images for deployment, recovery, and setup.

When you run the <code>DISM /Online /Cleanup-Image /RestoreHealth</code> command, it performs the following tasks:

Scans the Windows image for corruption and identifies any issues.
Verifies the integrity of the system file backups in the Component Store by comparing them against known good copies from the Windows Update servers.
Attempts to repair any corruption found in the Windows image by replacing the corrupted files with the known good copies.

It's important to note that running this command requires administrative privileges, and it may take some time to complete, depending on the system and the extent of the corruption.

-open cmd in admin

<code>DISM /Online /Cleanup-Image /RestoreHealth</code>

-after running DISM, run this right after, if errors are found, it will fix it, reboot pc

<code>SFC /scannow</code>

-after reboot, run CMD as admin and run again

<code>SFC /scannow</code>

<hr>

-Let's not forget the G.O.A.T., Use in Run to reset internet settings especially if you are having connecting MS app online or if Sonicwall Netextender breaks the connection

<code>RunDll32.exe InetCpl.cpl,ResetIEtoDefaults</code>
<hr>

<hr>
How to find mapped drives on cmd:

Open the Run dialog box by pressing the Windows <code>key + R.</code>

Type "cmd" and press Enter to open the Command Prompt.

Type <code>net use</code> and press Enter to see a list of all mapped network drives.

Find the drive you want to reconnect and take note of its name.

Type <code>net use <drive letter>: /delete</code> and press Enter to delete the mapping.

Type <code>net use <drive letter>: \server\share /persistent:yes</code> and press Enter to
recreate the mapping with the "persistent" option, which should keep the mapping
alive even after a disconnect.
<hr>

Create a Local user with CMD and make it into Admin, IF The username has a period in between please use the quotations.

<code>net user "user.name" password /add</code>

then

<code>net localgroup administrators "user.name" /add</code>

If you need to remove Admin creds

<code>net localgroup administrators "user.name" /delete</code>

if you need to delete the local account

<code>net user "user.name" /delete</code>

Disable builtin Administrator and Guest accounts:

<code>net user "Administrator" /active:no</code>

<code>net user "Guest" /active:no</code>

<hr>

Disable hibernation file to resolve issues with shutdown and free up some disk space.

<code>powercfg.exe /Hibernate off</code>

<hr>
Log off someone from a desktop session

List all sessions:

<code>query session</code>

Logoff the corresponding session:

<code>logoff {number}</code>

<hr>
Fix right click on Windows 11, doesn't need admin:

reg.exe add "HKCU\Software\Classes\CLSID\{86ca1aa0-34aa-4e8b-a509-50c905bae2a2}\InprocServer32" /f /ve</code>

<hr>
Fix alt key opening hamburger menu on ms edge [needs admin]:

reg add HKLM\SOFTWARE\Policies\Microsoft\Edge /v ConfigureKeyboardShortcuts /d {\"disabled\":[\"focus_settings_and_more\"]}

<hr>
Check if the Password is Expired

Get-ADUser -identity INSERTclientUSERNAMEHERE -properties PasswordLastSet, PasswordExpired, PasswordNeverExpires | ft Name, PasswordLastSet, PasswordExpired, PasswordNeverExpires
<hr>
Force the DC to sync the password

start-adsyncsynccycle -policytype delta
<hr>
Join a domain

add-computer -domainname "YourDomainName" -restart

<hr>
Getting New Teams to install when it refuses to [Needs Admin]

Add-ProvisionedAppPackage -Online -PackagePath "MSTeams-x64.msix" -SkipLicense

<hr>
List Services and their running status

Get-Service

<hr>
Set a service to autostart

Set-Service -Name {servicename} -StartupType 'Automatic'

<hr>
Start/Stop a service

Start-Service {servicename}
Stop-Service {servicename}
Restart-Service {servicename}

<hr>
Install OpenSSH-Server

<nowiki>Add-WindowsCapability -Online -Name OpenSSH.Server~~~~0.0.1.0</nowiki>

<hr>
Remove all default gateways from a network adapter

Remove-NetRoute -InterfaceAlias "{get this name from Get-NetAdapter}" -DestinationPrefix 0.0.0.0/0

<hr>
Set an IP Address

Get-NetAdapter -Name '{get this name from Get-NetAdapter}' | New-NetIPAddress -IPAddress {newIP} -PrefixLength {subnet mask [cidr]}

<hr>
Allow inbound Ipv4 Pings
netsh advfirewall firewall add rule name="ICMP Allow incoming V4 echo request" protocol=icmpv4:8,any dir=in action=allow

<hr>
Show all WiFi Passwords [CMD Only]
for /f "skip=9 tokens=1,2 delims=:" %i in ('netsh wlan show profiles') do @if "%j" NEQ "" (echo SSID: %j & netsh wlan show profiles %j key=clear | findstr "Key Content")

<hr>
Install server manager on a Non-Windows-Server OS
Get-WindowsCapability -Name RSAT* -Online | Add-WindowsCapability -Online

<hr>
Force update Group Policy (apply group policy changes)
gpupdate.exe /force

<hr>
Resize a VHD [Virtual Hard Disk]
resize-vhd -path "f:\Shares\profiledisks" -Sizebytes 30GB

<hr>
Persistently map a drive
Net use h: \\VBoxSvr\Win11\Documents /persistent:yes

Commands

2024-10-02T20:20:25Z

45.27.172.161:

Remote Desktop Setup

2024-09-19T13:11:26Z

45.27.172.161: Undo revision 547 by 45.27.172.161 (talk)

This is the page that hosts the download links for the Microsoft Remote Desktop App commonly used for Azure Virtual Desktop.

https://learn.microsoft.com/en-us/azure/virtual-desktop/users/connect-windows?pivots=remote-desktop-msi

If you get prompted for a workspace url, you can use this if it is AVD: https://rdweb.wvd.microsoft.com

*Connecting to Azure Virtual Desktop with Remote Desktop Client for Windows**

*Overview:
Learn how to connect to Azure Virtual Desktop using the Remote Desktop client for Windows. This guide outlines the process and prerequisites required for seamless access to desktops and applications.

*Prerequisites:
Before proceeding, ensure you meet the following requirements:

- Internet access.
- Device running one of the supported Windows versions: Windows 11, Windows 10, Windows Server 2022, Windows Server 2019, or Windows Server 2016.
- .NET Framework 4.6.2 or later.

*Download and Install Remote Desktop Client (MSI):
Follow these steps to install the Remote Desktop client using the MSI installer:

1. Download the appropriate installer for your device (64-bit, 32-bit, or ARM64).
2. Run the installer and follow on-screen prompts.
3. Choose installation scope based on user or machine preference.
4. Complete the installation process.

*Note: Avoid installing both the Remote Desktop client (MSI) and the Azure Virtual Desktop app from the Microsoft Store on the same device to prevent confusion.

*Subscribe to a Workspace:
To access desktops and applications, subscribe to a workspace as follows:

1. Open the Remote Desktop app.
2. Select "Subscribe" or "Subscribe with URL" from the initial screen.
3. Sign in with your user account.
4. Enter the Workspace URL or use the provided URL based on your Azure environment.
5. Sign in again if prompted.

*Note: Workspaces update automatically, reflecting changes made by your admin.

Connect to Desktops and Applications:
Once subscribed, connecting is straightforward:

1. Open the Remote Desktop client.
2. Launch a session by double-clicking the desired icon.
3. Enter your user account password if prompted.

By following these steps, you can seamlessly connect to Azure Virtual Desktop and access your resources with ease.

Main Page

2024-09-17T19:38:47Z

45.27.172.161:

Welcome to Lucca's Knowledgebase
<hr>

Windows: |
[[Commands]] | [[Win+R Shortcuts]] | [[Windows Keyboard Shortcuts]] | [[Remote Desktop Setup]] | [[End of Life]] | [[Make CMD Open Faster on Windows 11]] | [[Hyper-V on Windows Home]] | [[Domain Setup from Scratch on Server Core]]

<hr>

Linux: | [[Distro Download Links]] | [[Useful Commands]] | [https://arachnoid.com/SecureShell/index.html Arachnoid.com: How to use SSH] | [[Libvirt Setup]] | [[VFIO GPU Passthrough Setup]] | [[VFIO Anti-Cheat Bypass Tools]] | [[Xubuntu Mac Conversion Guide]] | [[Ungoogled Chromium Debian]] | [[Docker Installation on Debian]] | [[Infared Reciever w/ Alpine on the Bulldozer Datto]] | [[Numpad hotkeys on linux]] | [[Split a monitor in two]] | [[Make a udev rule]] | [[Type Unicode Characters]] | [[Screen Recording Options]]

<hr>

Retro Tech: |
[[Analog Video Articles]] | [[Modeline Generators]] | [https://github.com/antonioginer/ATOM-15 ATOM-15: AMD/ATI Card 15khz bios]

<hr>

Digital Archives: |
[https://archive.org archive.org] | [https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes kirb.feels archive] [https://libgen.is Library Genesis]

<hr>

Work Resources: |
[[Violentmonkey Script Documentation for Whit]] | [https://mxtoolbox.com/EmailHeaders.aspx MxToolbox Email Header Analyzer] | [https://www.sonicwall.com/products/remote-access/vpn-clients/ SonicWall NetExtender Downloads] | [https://www.sonicwall.com/support/knowledge-base/how-can-i-setup-ssl-vpn/170505609285133/ SonicWall SSLVPN Setup KB] | [https://obsidian.md/canvas interesting mind map tool]

<hr>
[https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes/wiki-files/happy%20monday/YdGUYXws5mD2fxFKxg.webp ☕Happy Monday =D] [https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes/wiki-files/happy%20monday/giphy.webp ☕Bom Dia =D] [https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes/wiki-files/happy%20monday/tenor.gif ☕??????]

<hr>

Analog Video Articles

2024-09-11T13:39:08Z

45.27.172.161:

https://www.cocopedia.com/wiki/index.php/15kHz_SVGA_Monitors

https://www.geocities.ws/podernixie/htpc/modes-en.html#especial

https://nyanpasu64.gitlab.io/blog/crt-modeline-cvt-interlacing/

https://www.mythtv.org/wiki/Modeline_Database

https://wiki.batocera.org/batocera-and-crt

https://antiqueradio.org/HomeTVTransmitter.htm

[https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes/batocera%2015khz%20output%20guide.pdf Batocera Linux 15khz output guide]

Main Page

2024-09-11T13:39:00Z

45.27.172.161:

Welcome to Lucca's Knowledgebase
<hr>

Windows: |
[[Commands]] | [[Win+R Shortcuts]] | [[Windows Keyboard Shortcuts]] | [[Remote Desktop Setup]] | [[End of Life]] | [[Make CMD Open Faster on Windows 11]] | [[Hyper-V on Windows Home]] | [[Domain Setup from Scratch on Server Core]]

<hr>

Linux: | [[Distro Download Links]] | [[Useful Commands]] | [https://arachnoid.com/SecureShell/index.html Arachnoid.com: How to use SSH] | [[Libvirt Setup]] | [[VFIO GPU Passthrough Setup]] | [[VFIO Anti-Cheat Bypass Tools]] | [[Xubuntu Mac Conversion Guide]] | [[Ungoogled Chromium Debian]] | [[Docker Installation on Debian]] | [[Infared Reciever w/ Alpine on the Bulldozer Datto]] | [[Numpad hotkeys on linux]] | [[Split a monitor in two]] | [[Make a udev rule]] | [[Type Unicode Characters]] | [[Screen Recording Options]]

<hr>

Retro Tech: |
[[Analog Video Articles]] | [[Modeline Generators]] | [https://github.com/antonioginer/ATOM-15 ATOM-15: AMD/ATI Card 15khz bios]

<hr>

Digital Archives: |
[https://archive.org archive.org] | [https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes kirb.feels archive] [https://libgen.is Library Genesis]

<hr>

Work Resources: |
[[Violentmonkey Script Documentation for Whit]] | [https://mxtoolbox.com/EmailHeaders.aspx MxToolbox Email Header Analyzer] | [https://www.sonicwall.com/products/remote-access/vpn-clients/ SonicWall NetExtender Downloads] | [https://www.sonicwall.com/support/knowledge-base/how-can-i-setup-ssl-vpn/170505609285133/ SonicWall SSLVPN Setup KB]

<hr>
[https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes/wiki-files/happy%20monday/YdGUYXws5mD2fxFKxg.webp ☕Happy Monday =D] [https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes/wiki-files/happy%20monday/giphy.webp ☕Bom Dia =D] [https://kirbfeels.gianluccapirovano.com/library/ArchivalPurposes/wiki-files/happy%20monday/tenor.gif ☕??????]

<hr>

Numpad hotkeys on linux

2024-09-06T19:21:30Z

45.27.172.161:

Making numpad hotkeys on linux is a bit more tricky than it is on windows due to the critical lack of autohotkey ;-;
<hr>

You'll need xmodmap, you can use it like this:

<code>xmodmap -e 'keycode 90 = Hyper_R'</code>

You can use XCape to allow the modifier keys to send actions on their own.
sudo apt install xcape
xcape -e 'Hyper_R=0'

<hr>
Resources
<hr>
https://wiki.archlinux.org/title/Xmodmap#Installation
https://github.com/alols/xcape